Nortel Networks NN43001-314 - Manual (Page 250)

250 MG 1000B software installation
Installing the cards
The following sections describe the process required to install the MGC
and CP PM cards.
Removing the SSC card
Step Action
1 Unlatch the SSC card.
2 Remove the SSC card from its slot.
ATTENTION
The SSC card should be preserved for a minimum of five days.
It is illegal to continue to run the system software on the existing SSC card. Please
DESTROY or RETURN the SSC dongle to your local Nortel Repairs/Returns
center. No further orders will be accepted for the serial number since it will be
decommissioned and tracked in Nortel’s database.
—End—
Installing a DSP Daughterboard
Table 12 lists the configuration options for Position 1 and 2.
Table 22
DSP Daughterboard configurations
Position 1 Position 2
DB32 (card slot 11) None
None DB32 (card slot 0)
DB32 (card slot 11) DB32 (card slot 0)
DB96 (card slot 11, 12 &13) None
DB96 (card slot 11, 12 &13) DB32 (card slot 0)
The following procedure describes how to install a DSP Daughterboard
on an MGC card.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.