Ricoh Aficio 2018D - Manual (Page 158)

Placing Originals
20
1
Placing custom size originals
When placing custom size originals in
the ADF, or ARDF, specify the size of
the originals.
Note
❒ Paper that has a vertical length of
105–297 mm (4.2"–11.6") and a hor-
izontal length of 128–1260 mm
(5.1"–49.6") can be placed with this
function.
AAAA
Select the paper tray or bypass
tray using
{{{{U U U U}}}} or {{{{T T T T}}}}, and then
press the
{{{{#}}}} key.
BBBB
Enter the horizontal size of the
original using the number keys,
and then press the
{{{{OK}}}} key.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key, and then enter
the value again.
CCCC
Enter the vertical size of the origi-
nal using the number keys, and
then press the
{{{{OK}}}} key.
The “Accepted” message appears
with your set original size.
When the custom size originals
settings are registered,
appears on the top of copy display.
KirC2_GBcopyF_FM.book Page 20 Tuesday, August 26, 2003 5:42 PM