Ricoh Aficio 2018D - Manual (Page 683)

Printing with NetWare
61
5
DDDD
On the [File] menu, click [Proper-
ties]
.
EEEE
Click the [Details] tab, and then
click [Add Port].
FFFF
Click [Network], and then click
[Browse]
.
GGGG
In the tree pane, double-click the
name of the file server.
The queues are displayed.
HHHH
Select the queue you want to
print, and then click [OK].
IIII
Click [OK].
In the [Print to the following port] box,
a network path to the printer ap-
pears.
JJJJ
Click [OK] to close the printer
properties dialog box, and open it
again.
KKKK
Click the [Printer Settings] tab.
LLLL
Clear the [Form feed] and [Enable
banner]
check boxes.
Note
❒ You do not have to select these
boxes because they should be
specified in the printer driver. If
they are selected, the printer
might not print correctly.
When using the PostScript printer
driver
Follow the procedure below to set
the PostScript printer driver:
A Click the [PostScript] tab.
B Click [Advanced].
C Clear the [Send CTRL+D before
job] and [Send CTRL+D after job]
check boxes.
MMMM
Click [OK] to close the printer
properties dialog box.
Windows 2000/XP, Windows NT 4.0
Follow the procedure below to set up
a Windows 2000/XP, Windows NT
4.0 client computer.
Preparation
Log on to the NetWare file server
before starting the following pro-
cedure:
AAAA
Double-click [My Network Places],
navigate to the queue you want to
use, and then double-click it.
The [Printers] dialog box appears.
Note
❒ When using Windows NT 4.0,
the Network Neighborhood
icon appears on the desktop in-
stead of the My Network Places
icon.
BBBB
Click [Yes], and then click [OK].
Add Printer Wizard starts.
CCCC
Insert the CD-ROM labeled
“Printer Drivers and Utilities”
into the CD-ROM drive, and then
click [Have Disk].
If the setup menu starts automati-
cally, you can proceed to the next
step. If not, see Printer Reference 1.
DDDD
Follow the instructions on screen
to complete installation of the
printer driver.