Configuring a windows nt 4.0 computer – Ricoh Aficio 2018D User Manual

Page 661

Advertising
background image

Configuring NetBEUI

39

4

Configuring a Windows NT 4.0
Computer

Follow the procedure below to con-
figure a Windows NT 4.0 computer to
use NetBEUI.

AAAA

Open [Control Panel], and then
double-click the Network icon.
Make sure [NetBEUI Protocol] is
listed in the [Network protocols] box
on the [Protocols] tab.

Note

❒ If NetBEUI is not installed, click

[Add]

on the [Protocols] tab to in-

stall it. For more information
about installing NetBEUI, see
Windows NT 4.0 Help.

BBBB

Change the Lana Number. Click
the [Services] tab, click [NetBIOS In-
terface]

in the [Network services]

box, and then click [Properties].

CCCC

Click the Lana Number corre-
sponding to the Nbf protocol in
the [Network Route] column, and
then click [Edit].

DDDD

Enter “0” as the Lana Number.

Note

❒ If the other protocol's Lana

N u m b e r i s “ 0 ” , y o u m u s t
change the Lana Number to a
number other than “0”.

EEEE

Click [OK].

FFFF

Click [Close] to close the [Network]
dialog box.
The confirmation message about
restarting appears.

GGGG

Click [Yes].

Note

❒ After you change the Lana

Number, you must restart the
computer.

Advertising
This manual is related to the following products: