Placing originals in the optional adf or ardf – Ricoh Aficio 2018D User Manual

Page 423

Advertising
background image

Placing Originals

13

2

Placing Originals in the
Optional ADF or ARDF

Use the ADF or ARDF to scan in a
stack of originals in one operation.
The ARDF can handle both one-sided
and two-sided originals.

Limitation

❒ Place all the originals to be sent in

a single stack. You cannot place
originals in the ADF or ARDF one
page at a time or in successive
stacks.

Note

❒ To send an original longer then the

following lengths, use Memory
Transmission. However, the maxi-
mum length of an original for
Memory Transmission is 1200 mm
(47").
• A3 or 11"

×17" size: 850 mm

(33.5") for Standard, 432 mm
(17") for Detail

• B4 JIS or 8

1

/

2

"

×14" size: 1000

mm (39.4") for Standard, 500
mm (19.7") for Detail

• A4 or 8

1

/

2

"

×11" size: 600 mm

(23.6") for Detail, 300 mm (11.8")
for Fine

❒ If you frequently send long docu-

ments, set Long Document Trans-
m i s s i o n t o o n w i t h t h e U s e r
Parameters. If a jam occurs, the
document might be damaged be-
cause scanning will not stop. See
p.80 “User Parameters”, Facsimile
Reference <Advanced Features>
(switch 14, bit 1).

❒ If your original is bent or folded,

flatten it before you place it.

❒ When sending thin originals, place

them on the exposure glass.

❒ If an original jammed, press the

{{{{Clear/Stop}}}} key, and then slowly

remove the original.

❒ You can check information about

the sizes and number of originals
that can be placed in the ADF or
ARDF. See p.109 “Acceptable
Types of Originals”, Facsimile Ref-
erence <Advanced Features>
.

AAAA

Adjust the document guide to
match the size of the originals.

BBBB

Align the edges of the originals
and stack them in the ADF or
ARDF face up.

1.

Limit mark

2.

Document guide

Originals unsuitable for the optional ADF
or ARDF

Do not place the following types of
originals in the ADF or ARDF be-
cause they may be damaged. Place
them on the exposure glass instead.
• Originals in unacceptable sizes

(See p.109 “Acceptable Types of
Originals”, Facsimile Reference <Ad-
vanced Features>
.)

• Originals containing staples or

clips

• Perforated or torn originals

AAN051S

Kir-C2-AEcombine_F_FM.book Page 13 Monday, September 29, 2003 11:36 AM

Advertising
This manual is related to the following products: