Ricoh Aficio 2018D - Manual (Page 694)

Using SmartDeviceMonitor for Admin
72
7
Managing Address Information
AAAA
Start SmartDeviceMonitor for
Admin.
BBBB
On the [Group] menu, point to
[Search Device]
, and then click
[TCP/IP] or [IPX/SPX].
A list of machines appears.
Note
❒ Select the protocol of the ma-
chine for which you want to
change configuration.
CCCC
In the list, select the machine for
which you want to change config-
uration.
DDDD
On the [Tools] menu, click [Ad-
dress Management Tool]
.
The dialog box for entering the
password appears.
EEEE
Enter the password, and then
click [OK].
Note
❒ The factory default password is
“password”.
Address Management Tool starts.
Reference
For more information about
Address Management Tool, see
Address Management Tool
Help.
Configuring Energy Saver
Mode
AAAA
Start SmartDeviceMonitor for
Admin.
BBBB
On the [Group] menu, point to
[Search Device]
, and then click
[TCP/IP] or [IPX/SPX].
A list of machines appears.
CCCC
On the [Group] menu, point to [En-
ergy Saver Mode]
.
For more information about the
Energy Saver Mode settings, see
SmartDeviceMonitor for Admin
Help.
Note
❒ Point to [Set by Group] if you
want to change all devices in the
area.
❒ Point to [Set Individually] if you
want to change only selected
devices.
❒ When you point to [Set Individu-
ally] , [Timer Settings] is not dis-
played.