Network configuration, Configuring the network using the control panel, Configuring the network using other utilities – Ricoh Aficio 2018D User Manual
Page 645
User Tools Menu (System Settings)
23
3
Network Configuration
Any change you make with User
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the
{{{{Clear
Modes
}}}} key is pressed.
Configuring the network using the
control panel
Note
❒ Operations for System Settings are
different from normal operations.
After using User Tools, press the
{{{{User Tools/Counter}}}} key to exit.
❒ If the key operator code has been
set, the key operator code entry
screen appears. Enter the code, and
then press the
{{{{OK}}}} key. For de-
tails about the key operator code,
see General Settings Guide.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Select [System Settings] using
{{{{U
U
U
U}}}}
or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}}
key.
CCCC
Select [Interface Settings] or [File
Transfer]
using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and
then press the
{{{{OK}}}} key.
DDDD
Select the setting you want to
change, and then press the
{{{{OK}}}}
key.
EEEE
Change the setting, and then
press the
{{{{OK}}}} key.
Note
❒ Press the {{{{Cancel}}}} key to cancel
the setting.
FFFF
Press the
{{{{User Tools/Counter}}}} key.
Configuring the network using other utilities
As well as using the control panel to make network settings, utilities such as a
Web browser and SmartDeviceMonitor for Admin can also be used. The follow-
ing table shows available settings:
Note
❒ ❍ Indicates machine settings can be changed.
❒ - Indicates the setting cannot be changed from that device.
Name on the control panel
Web
browser
SmartDe-
viceMon-
itor for
Admin
telnet
Interface
Settings
Network
IP
Address
Auto-Obtain (DHCP)
❍
❍
❍
Specify
IP Add.
❍
❍
❍
Subnet M
❍
❍
❍
Mac Add.
-
-
-
Gateway Address
❍
❍
❍