Programming, Initial settings and adjustments – Ricoh Aficio 2018D User Manual

Page 465

Advertising
background image

55

4. Programming

Initial Settings and Adjustments

You can send information to the other
party when transmitting or receiving
a fax message. This information is
shown on the display of the other ma-
chine and printed as a report. The fol-
lowing information can be sent.

Important

❒ You can confirm programmed set-

tings from the User Parameter List.
We recommend that you print and
keep the User Parameter List when
you program or change settings.
See p.84 “Printing the User Param-
eter List”, Facsimile Reference <Ad-
vanced Features>
.

Fax Header

The Fax Header is printed as the
header of every fax you send. You
should include your name in the
Fax Header.

Note

❒ You can program up to 32 char-

acters in the Fax Header.

❒ You can use characters, sym-

bols, numbers, and spaces.

❒ You can set whether or not to

print a Fax Header using [Print
Fax Header]

under [TX Mode]. See

p.10 “Fax Header Print”, Fac-
simile Reference <Advanced Fea-
tures>
.

Own Name

The Own Name is sent to the other
party when you send or receive a
fax using a G3 line. This name
should include your name. The
Own Name is shown on the dis-
play of the other machine and
printed in a report.

Limitation

❒ Own Name works only when

the other machine is of the same
manufacturer, and has the Own
Name function.

Note

❒ You can use characters, sym-

bols, numbers, and spaces.

❒ You can program up to 20 char-

acters as an Own Name.

Own Fax Number (facsimile number

of sender)
The sender's Own Fax Number is
sent to the other party when send-
ing a fax using a G3 line. The re-
ceived facsimile number is shown
on the display of the other machine
and printed in a report. This func-
tion is available regardless of the
manufacturer of the other party's
machine.

Note

❒ You can program up to 20 char-

acters in Own Fax Number.

Note

❒ When the Key Operator Code is

programmed and turned on, user
have to enter programmed the Key
Operator Code (maximum 8 digit)
to operate Key Operator Tools.

❒ This prevents unauthorized peo-

ple from changing registration.

Kir-C2-AEcombine_F_FM.book Page 55 Monday, September 29, 2003 11:36 AM

Advertising
This manual is related to the following products: