Domain name – Ricoh Aficio 2018D User Manual

Page 716

Advertising
background image

Appendix

94

9

DNS

Use the “dns” command to configure
or display DNS (Domain Name Sys-
tem) settings.

View setting

The following command displays
current DNS settings:

msh> dns

Using the DNS server obtained from

the DHCP server

The following command ena-
bles/disables use the DNS server
obtained from the DHCP server:

msh> dns dhcp {valid |
invalid}

• If you use the DNS server ob-

tained from the DHCP server,
select “valid”. If not, select
“invalid”.
If you set “valid”, the DNS serv-
er from the DHCP server is pri-
oritized.

DNS server configuration

The following command ena-
bles/disables use of the DNS serv-
er address:

msh> dns number server
server_address
The following is a sample configu-
ration using an IP address of
192.168.15.16 on DNS 1 server:

msh> dns 1 server
192.168.15.16

• You can register up to three

DNS server numbers.

• You cannot use “255.255.255.255”

as the DNS server address.

Domain name

Use the “domainname” command to
display or configure domain name
settings.
You can configure the Ethernet inter-
face, IEEE 1394 interface, or IEEE
802.11b interface.

View setting

The following command displays
the current domain name:

msh> domainname

Interface domain configuration

The following command displays
or sets the Ethernet interface do-
main name, IEEE 1394 interface, or
IEEE 802.11b interface.

msh> domainname
interface_name domain_name
The following is a sample configu-
ration using a domain name on the
Ethernet interface:

m s h > d o m a i n n a m e e t h e r
domain_name

*1

Available when the optional 1394

interface board is installed.

*2

Available when the optional

802.11b interface unit is installed.

Note

❒ A domain name can consist of

up to 63 alphanumeric charac-
ters.

Interface

Interface that can
be set

ether

Ethernet interface

ip1394

*1

IEEE 1394 interface

wlan

*2

IEEE 802.11b inter-
face

Advertising
This manual is related to the following products: