Ricoh Aficio 2018D - Manual (Page 785)

3
1. UNIX Configuration
This section explains how to set up a network printer and check print status us-
ing UNIX.
Limitation
❒ To print from a UNIX workstation, use a file that the printer supports.
Before Setup
Setup varies depending on the printing commands. Be sure to make settings ac-
cordingly.
Using the “lp”/“lpr” commands
AAAA
Use the installation shell script to register the device option, as well as the
printer host name and IP address.
See p.4 “Using the Installation Shell Script”.
BBBB
Start printing.
See p.14 “Printing Methods”.
Using the “rsh”/“rcp”/“ftp” commands
AAAA
Edit the host file to register the printer host name and IP address.
BBBB
Start printing.
See p.14 “Printing Methods”.
Reference
For information about host file editing, see p.9 “After Executing the Instal-
lation Shell Script”.
Note
❒ If you cannot edit the host file, use the install shell script to register the host
name.