Ricoh Aficio 2018D User Manual

Page 738

Advertising
background image

Appendix

116

9

IEEE 802.11b TX Rate <Transfer Speed>

The IEEE 802.11b transmitting speed (set
speed) is displayed.

(Example: current Tx Rate is 11 Mbps.)

IEEE 802.11b Tx Rate 11 Mbps
Transmission speeds vary depending on sig-
nal quality. Displayed values may differ from
actual transmission speed.

inetd start.

An inetd has started.

<interface> started with IP: <IP address>

<IP address> has been set for <Interface> and
<Interface> started.

<Interface>: Subnet overlap.

Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.

Set Subnet so it does not overlap with another
interface.

IPP cancel-job: permission denied.

The printer could not authenticate the name of
the user attempting to cancel a job.

ipp disable.

Printing with ipp is disabled.

ipp enable.

Printing with ipp is enabled.

IPP job canceled. jobid=%d.

The spooled job has been canceled due to er-
ror or user request.

job canceled. jobid=%d.

The spooled job has been canceled due to er-
ror or user request.

LeaseTime=<lease time>(sec), RenewTime=
<renew time>(sec).

The resource lease time received from the
DHCP server is <lease time> in seconds. The
renewal time is also <renew time> in seconds.

Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)

(In print server mode) Logged on to the file
server with NDS or BINDERY mode.

multid start.

Data transmission service for multiprotocols
has started.

Name registration failed. name=<NetBIOS
name>

The printer could not register the name of
NetBIOS.

Name registration success in Broadcast
name=<NetBIOS name>

The NetBIOS name was successfully regis-
tered from a broadcast.

Name registration success. WINS Server=
<WINS Server Address> NetBIOS
Name=<NetBIOS name>

The NetBIOS name was successfully regis-
tered to the WINS server.

nbstart start.(NetBEUI)

The server for setting the NetBEUI protocol
stack has started.

nbtd start.

nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)

Message

Causes and solutions

Advertising
This manual is related to the following products: