Ricoh Aficio 2018D - Manual (Page 522)

Other Transmission Features
28
3
Manual Dial
The external telephone is required.
Pick up the handset of the external
telephone and dial. When the line is
connected and you hear a high-
pitched tone, press the
{{{{Start}}}} key to
send your fax message. If, on the oth-
er hand, you hear a voice at the other
end, continue conversation as nor-
mal.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.25 “Scan Settings”, Facsimile
Reference <Basic Features>
BBBB
Pick up the external telephone.
You will hear a tone.
CCCC
Dial.
The machine immediately dials the
destination.
Note
❒ If you make a mistake, replace
the external telephone, and then
try again from step
B .
DDDD
When the line is connected and
you hear a high-pitched tone,
press the
{{{{Start}}}} key to send your
fax message.
The transmission starts.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
EEEE
Replace the handset of the exter-
nal telephone.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the
{{{{Clear/Stop}}}} key,
and then remove the originals.
Kir-C2-AEcombine_F_FM.book Page 28 Monday, September 29, 2003 11:39 AM