Ricoh Aficio 2018D - Manual (Page 318)

Preparing to Print
14
2
The following table shows the printer
drivers and software that can be in-
stalled using Auto Run:
*1 Available operating systems are: Win-
dows 95/98/Me, Windows 2000/XP,
Windows Server 2003, and Windows
NT 4.0. Auto Run is unavailable with
Macintosh.
Quick Install
Auto Run will start the installer auto-
matically when you insert the CD-
ROM into the CD-ROM drive. By se-
lecting Quick Install, you can easily
install the PCL 6 printer driver and
the RPCS™ printer driver. SmartDe-
viceMonitor for Client can also be in-
stalled provided the machine and
computer are connected via the net-
work.
Preparation
Before starting installation, close
all documents and applications.
Limitation
❒ The following conditions are re-
quired:
• Windows 95/98/Me/2000/XP,
Windows Server 2003, or Win-
dows NT 4.0
For network connections:
• The machine must be connected to
the network using an Ethernet ca-
ble.
• TCP/IP protocol must be config-
ured.
• The IP address must be assigned to
both machine and computer.
• The IEEE 802.11b interface unit is
installed and the connection is
properly made.
• The IEEE 1394 interface board (IP
over 1394) is installed and the con-
nection is properly made.
For parallel connections:
• The machine must be connected to
the computer using a parallel ca-
ble.
• Bidirectional transmission must be
enabled.
Auto Run *1
Quick Install Add
Printer
and
Utility
Wizard
Net-
work
connec-
tion with
TCP/IP Parallel
connec-
tion
PCL 6
printer
driver
❍ ❍ ❍
PCL 5e
printer
driver
❍
RPCS™
printer
driver
❍ ❍ ❍
Post-
Script 3
printer
driver
❍
LAN-Fax
Driver
❍
Font
Manager
2000
❍
SmartDe-
viceMon-
itor for
Admin
❍
SmartDe-
viceMon-
itor for
Client
❍ ❍
KirC2-GB-Pref1-F_FM.book Page 14 Monday, September 8, 2003 2:43 PM