Ricoh Aficio 2018D - Manual (Page 199)

Maintaining Your Machine
61
5
Maintaining Your Machine
If the exposure glass, exposure glass
cover, ADF belt, or ARDF belt is dirty,
copy clarity may be reduced. Clean
these parts if they are dirty.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents such as thinner or
benzene. If such substances get in-
side the machine or melt plastic
parts, a failure might occur.
❒ Do not clean parts other than those
explicitly specified in this manual.
Other parts should only be cleaned
by your service representative.
Cleaning the Exposure Glass
Cleaning the Exposure Glass
Cover
Cleaning the ADF or ARDF
ND1C0200
TRSR140E
KirC2_GBcopyF_FM.book Page 61 Tuesday, August 26, 2003 5:42 PM