Ricoh Aficio 2018D - Manual (Page 798)

UNIX Configuration
16
1
Note
❒ You can use wild cards (“*” or “?”) for the file name with the “mput” com-
mand.
The following procedure shows an example of how to print a file using the “ftp”
command.
AAAA
Start ftp using the IP address or host name of the printer.
% ftp IP_address
BBBB
Enter the user name. Leave the password field blank and press the
{{{{RE-
TURN
}}}} ({{{{ENTER}}}}) key.
Name:
Password:
CCCC
Set the file transfer mode to binary.
ftp> bin
Note
❒ If the file transfer mode is not set to binary, the image may not be printed
correctly.
DDDD
Print the file.
Note
❒ For example, to print the file named “file1”:
ftp> put file1
❒ For example, to print the two files named “file1” and “file2”:
ftp> mput file1 file2
EEEE
Exit ftp.
ftp> bye