Omron Programmable Terminals NT631C User Manual
Setup manual, Programmable terminals
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- NT631 and NT631C Programmable Terminals
- Notice:
- About this Manual:
- Related Manuals:
- Warranty
- PRECAUTIONS
- SECTION 1 General
- SECTION 2 Preparing for Connection
- SECTION 3 Hardware Settings and Connections
- SECTION 4 Connecting to the Host from the RS-232C Port
- SECTION 5 Connecting to the Host from the RS-422A/485 Port
- 5-1 Connecting to the Host’s RS-232C Port
- 5-1-1 The Type of Host and Settings
- 5-1-2 1:1 Connection between RS-422A/485 at the PT and RS-232C at the Host
- 5-1-3 1:N Connection between RS-422A/485 at the PT and RS-232C at the Host
- 5-1-4 Recommended Connectors, Cables, and Crimp Terminals
- 5-1-5 Setting the Terminal Resistance for RS-422A/485 Communications
- 5-2 Connecting to the Host’s RS-422A/485 Port
- 5-2-1 Host Types and Settings
- 5-2-2 Direct Connection between RS-422A Ports at Both Units
- 5-2-3 Direct Connection between RS-485 Ports at Both Units
- 5-2-4 1:N Connection among RS-422A Ports
- 5-2-5 1:N Connection among RS-485 Ports
- 5-2-6 Recommended Connectors, Cables and Crimp Terminals
- 5-2-7 Setting the Terminal Resistance for RS-422A/485 Communications
- 5-2-8 Handling the Shield on RS-422A/485 Cables
- 5-1 Connecting to the Host’s RS-232C Port
- SECTION 6 System Menu Operation
- 6-1 System Menu Operation Flow
- 6-2 Starting the NT631/NT631C
- 6-3 Operation Modes and the System Menu
- 6-4 Memory Initialization
- 6-5 Operations in the System Installer Mode
- 6-6 Transmitting the Screen Data
- 6-7 Setting Conditions for Communications with Host by Using Memory Switches
- 6-8 Starting Operation
- 6-9 Various System Settings
- 6-9-1 Memory Switch Setting Screens
- 6-9-2 Setting the Start-up Wait Time
- 6-9-3 Setting the Key Press Sound
- 6-9-4 Setting the Buzzer Sound
- 6-9-5 Setting the Printer Controller
- 6-9-6 Setting the Print Method (NT631C Only)
- 6-9-7 Setting Screen Saver Movement
- 6-9-8 Setting the Screen Saver Start-up Time
- 6-9-9 Setting the History Display Method
- 6-9-10 Setting the Resume Function
- 6-9-11 Setting the Automatic Reset Function
- 6-9-12 Setting the Time-out Interval
- 6-9-13 Setting the Retry Count
- 6-10 Setting the Bar Code Reader Input Function
- 6-11 System Maintenance
- 6-12 Programming Console Function
- 6-13 Device Monitor Function
- 6-14 Version Display
- SECTION 7 Troubleshooting and Maintenance
- 7-1 Troubleshooting
- 7-2 Responding to Displayed Error Messages
- 7-2-1 Errors Occurring at Start of Operation and Their Remedies
- 7-2-2 Errors Occurring during Operation and Their Remedies
- 7-2-3 Errors Occurring on Screen Data Initialization and Transmission
- 7-2-4 Errors in the System Installer Mode and Their Remedies
- 7-2-5 Communications Errors and Their Remedies
- 7-3 Maintenance of the NT631/NT631C
- 7-4 Inspection and Cleaning
- Appendix A Specifications
- Appendix B Dimensions
- Appendix C Using an RS-232C/RS-422A Adapter
- Appendix D Transporting and Storing the NT631/NT631C
- Appendix E Making the Cable
- Appendix F Making the Cable for Connecting a PLC
- Appendix G Making the Cable for Connection to a Bar Code Reader
- Appendix H Making the Cable for Connection to a Printer
- Appendix I Relationship between system program and hardware
- Appendix J Model List
- Appendix K Option List
- Index
- Revision History