Omron Programmable Terminals NT631C User Manual
Page 296
279
Relationship between system program and hardware
Appendix I
Combining a -EV2 Version and Version without a -EV
@ Suffix
* The system program’s version can be checked from the System Menu.
Hardware
NT631-ST211
@-E
NT631C-ST141
@-E
NT631C-ST151
@-E
NT631-ST211
@-EV2
NT631C-ST141
@-EV2
NT631C-ST151/152
@-EV2
System program Ver. 1.0
@
The following functions cannot be used:
• Analogue meter
• High-definition font display
• Installation of system programs using
Memory Unit
• Connection to Mitsubishi PLCs
• Memory link
• Window control from the host
• Multiple display of window screens
• Moving a window
• Additional data areas accessible in CS/
CJ-series PLCs
• The CS/CJ-series high-speed 1:N NT
Link
• Interlock function that controls touch
switches, numeral inputs, and character
string inputs
• Mathematical function
• Device Monitor function
• NT30/620 compatible mode
• Expanded capabilities for label (guide
character) displays, including multiple
lines of text, ON/OFF switching displays,
numeral memory table displays, and
character string memory table displays
The following functions cannot be used:
• Analogue meter
• High-definition font display
• Connection to Mitsubishi PLCs
• Memory link
• Window control from the host
• Multiple display of window screens
• Moving a window
• Additional data areas accessible in CS/
CJ-series PLCs
• The CS/CJ-series high-speed 1:N NT
Link
• Interlock function that controls touch
switches, numeral inputs, and character
string inputs
• Mathematical function
• Device Monitor function
• NT30/620 compatible mode
• Expanded capabilities for label (guide
character) displays, including multiple
lines of text, ON/OFF switching displays,
numeral memory table displays, and
character string memory table displays
* Installation of system programs using
Memory Unit is possible.
System program Ver. 3.0
@
The following functions can not be used:
• Installation of system programs using
Memory Unit
• High-definition font display
All of the functions described in the Setup
Manual and Reference Manual can be
used.