Omron Programmable Terminals NT631C - Manual (Page 172)

155
Setting Conditions for Communications with Host by Using Memory Switches Section 6-7
6-7-2 Setting the Host Link Method
Set the communications conditions for the host link method at serial port A or
serial port B by following the operation from the System Menu shown below.
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Display the fourth memory switch
screen by pressing the [
↓] (next screen)
or [ ↑] (previous screen) touch switch.
Press the touch switch corresponding to
the port at which the host link method is
to be set (Comm. A Method or Comm. B
Method) to display the setting option Host
Link.
The setting option changes each time the
touch switch is pressed.
Press the Set touch switch to the right of
the port at which the setting has been
made.