Omron Programmable Terminals NT631C User Manual
Page 26
9
Functions of the NT631/NT631C
Section 1-2
*1
This is the capacity of the flash memory that stores screen data.
*2
The values are the same as the NT30/NT30C when the PT is in NT30/620 compatible mode.
For differences in programming, refer to Appendix B in the NT31/NT31C/NT631/NT631C Programmable Termi-
nal Reference Manual.
Interlock function
None
Operations can be disabled from the PLC by
allocating interlock bits to the corresponding
touch switch, numeral input, or character string
input.
Device monitor function
Not possible
Possible
Recipe function
None
Possible
Accessible CS/CJ-series PLC
data areas
---
The data areas listed below can be accessed in
addition to the data areas accessible with the
NT30/NT30C.
- EM banks (EM_0 to EM_C)
- Timer completion flags (TU)
- Counter completion flags (CU)
- Work areas (WR)
- Task flags (TK)
- HR area
Item
NT620S/NT620C/NT625C
NT631/NT631C