Related manuals – Omron Programmable Terminals NT631C User Manual
Page 9
x
Related Manuals:
Related manuals are listed below.
The
@ symbol at the end of the catalog number is the revision number.
Connecting and Setting Up the Programmable Terminal
• NT631 and NT631C PT Setup Manual (V063-E1-
@, this manual)
This manual describes connecting the Programmable Terminals to a host and peripheral devices and
settings required for communications and applications.
The functions and actual operating methods for the NT631 and NT631C PTs are provided in the Refer-
ence Manual (V064-E1-
@).
Programmable Terminal Functions and Operation
• NT31/31C/631/631C PT Reference Manual (V064-E1-
@)
This manual is used for any of the following PTs: NT31, NT31C, NT631, and NT631C. It describes
screen configurations, part functions, host control methods, and other application information.
PT connection and setup procedures are described in the NT631 and NT631C PT Setup Manual
(V063-E1-
@).
Creating and Transferring Screen Data, and Installing the System Program
• NT-series Support Tool for Windows Ver. 4.
@ Operation Manual (V061-E1-@)
The screens displayed on the NT631 and NT631C PTs are created with the Support Tool and trans-
ferred to the PT. This manual describes how to create and transfer screen data. It also describes how
to download a system program to a PT using the System Installer.
The NT-series Support Tool for Windows is normally referred to as merely the Support Tool.
Connecting to Controllers Not Made by OMRON
• PLC Connection Manual (V042-E1-
@)
The NT631 and NT631C PTs can be connected to controllers in the following series: Mitsubishi A
Series and FX Series. This manual describes the connection and setup methods for these controllers.
The NT-series Support Tool for Windows Version 4.
@ is required to connect the NT631 and NT631C
PTs to these controllers.
• NT31/NT631 Multi Vendor Connection Manual (V060-E1-
@)
The NT631 and NT631C PTs can be connected to controllers in the following series: Allen-Bradley
SLC 500 Series, GE Fanuc 90-20 and 90-30 Series, and Siemens S7-300 and S7-400 Series. This
manual describes the connection and setup methods for these controllers.