Omron Programmable Terminals NT631C - Manual (Page 158)

141
Memory Initialization Section 6-4
Initialize the recipe tables by following the menu operation from the System
Menu shown below.
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU
screen without initializing the recipe tables.
On completion of memory table initialization, the message Finished is dis-
played and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
6-4-5 Initializing the Memory Tables
It is possible to initialize the numeral memory tables and character string
memory tables in the NT631/NT631C.
When these tables are initialized, the values are returned to those set by the
Support Tool (they are not cleared).
Select Maintenance Mode.
Select Memory Init..
Select Recipe Table.
Select Yes.
Ver 4.12
The recipe tables are initialized.
During initialization, the message
Initializing is displayed.