Omron Programmable Terminals NT631C - Manual (Page 216)

199
System Maintenance Section 6-11
Specifying The Display Method
Specify the display method for the screens as indicated in the table below.
* Default (factory) setting
Reference: Each setting of the screen data check is effective only on this menu. Exiting
from this screen data check menu resets the settings to the default (all the
settings are set to OFF).
Operations On The SCREEN DATA CHECK Screen
The function shown below can be set on the SCREEN DATA CHECK screen.
Use this function as required when displaying complex screens on which mul-
tiple display elements have been registered overlapping each other.
a. Display the previous display element on the upper most portion of the
screen in the order in which the display elements were registered (ex-
cluding fixed display elements).
b. Display the next display element on the upper most portion of the
screen in the order in which the display elements were registered (ex-
cluding fixed display elements).
c. Return to the screen on which screens are specified.
Setting Item Function Setting
Options
Display of Lamp/
Touch SW No. Allows designation of whether the bit number of the lamp bit set for a lamp or touch
switch is displayed or not.
The display format is as follows L @ ❍❍❍❍❍❍❍ (@: area type, ❍❍❍❍❍❍❍: bit num-
ber).
ON, OFF*
Display of Memory
Table No. Allows designation of whether the table numbers of numeral and character string
memory tables are displayed or not.
The display format for numeral memory tables is N ❍❍❍❍ and the display format for
character string memory tables is S ❍❍❍❍.
This function is valid for the following display elements.
- Numeral displays
- Character string displays
- Bar graphs
- Numeral setting input fields (including thumbwheel type)
- Character string input fields
ON, OFF*
Display of image/
Library No. Allows designation of whether image/library code numbers are displayed or not. ON, OFF*
Display of Broken
Line Frame Allows designation of whether or not broken line frames are displayed around the dis-
play elements for showing the positions registered. ON, OFF*
a) Equivalent to 2 touch switches (14.4 mm)
NT631 : 14.4 mm
NT631C : 13.2 mm
c)
b) Equivalent to 2 touch switches (14.4 mm)
NT631 : 14.4 mm
NT631C : 13.2 mm