Omron Programmable Terminals NT631C - Manual (Page 187)

170
Various System Settings Section 6-9
• For details on the print function, refer to 2-15-7 Print Function in the Ref-
erence Manual.
Set the print method setting by following the menu operation from the System
Menu shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT631/
NT631C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT631/NT631C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
6-9-7 Setting Screen Saver Movement
The NT631/NT631C has a function to prevent the formation of an afterimage
by turning off the screen display if no operation is performed for a certain
period of time, and then displaying character strings at random positions and
in random colors (the colors only change for the NT631C).
The Screen Saver Movement setting determines whether or not these charac-
ter strings are displayed while the screen display is off.
If Display is selected, the character string stored in character string memory
table No. 0 is displayed.
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Press Print Method to display the required
printing method.
The setting option changes each time the
touch switch is pressed.