Omron Programmable Terminals NT631C - Manual (Page 186)

169
Various System Settings Section 6-9
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT631/
NT631C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT631/NT631C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
6-9-6 Setting the Print Method (NT631C Only)
The NT631/NT631C has a function for printing out data at a printer connected
to it in response to an instruction from the host or operation at the NT631/
NT631C.
When using the NT631C, the currently displayed screen image or other data
can be printed out in color. You can select whether screen data is actually
printed out in color, or in monochrome tones that represent colors, with this
memory switch setting.
When PCL 5 is set for Printer Controller, the setting is fixed as Tone.
• Color: Color images are printed in color.
• Tone: Color images are printed in monochrome tones.
The default (factory) setting is Tone.
Reference: • In addition to this setting, NT631C has the Printer Controller setting
(page 168).
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Press Printer Controller to display the
required printer type.
The setting option changes each time
the touch switch is pressed.