Omron Programmable Terminals NT631C - Manual (Page 197)

180
Various System Settings Section 6-9
Set the automatic reset function by following the menu operation from the
System Menu shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press
the Quit touch switch. The settings made last will be set and the NT631/
NT631C will return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings,
press the Abort touch switch. The NT631/NT631C will return to the MAIN-
TENANCE MODE MENU screen with the previous settings still in effect.
Select Maintenance Mode.
Select Memory Switch.
Ver 4.12
Press Comm. Auto-return to display the
required setting.
The setting option changes each time the
touch switch is pressed.
Press [
↓] (next screen) or [↑] (previous
screen) to display the third memory
switch setting screen.