Omron Programmable Terminals NT631C - Manual (Page 53)

36
Connecting a Printer Section 3-3
3-3 Connecting a Printer
Connecting a printer to the NT631/NT631C enables printing of hard copies of
the currently displayed screen (printing of screen images), and, by system
menu operations, printing of the screen display history and alarm history.
The following types of data can be printed, depending on the printer con-
nected to the NT631/NT631C. For details, refer to the pages cited.
• Hard copies of the screen (Refer to information on printing data and
checking the printer status in the NT31/NT31C/NT631/NT631C Program-
mable Terminal Reference Manual.)
• Screen display history record data (page 194)
• Alarm history record data (page 196)
3-3-1 Connection Method
Connect the printer to the NT631/NT631C with a Centronics cable, as shown
below. The length of the cable should not exceed 1.5 m.
Reference:
If the connector cable is connected or disconnected while the power to the
printer is on, the NT631/NT631C may malfunction. Always turn off the power
to the printer before connecting or disconnecting the cable.
Recommended Connector Cable
The following connection cables are recommended.
NT-CNT121 (1.5 m, 20-pin to 36-pin), made by OMRON
Recommended Printers
When using a printer, use one that can emulate an NEC PC-PR201H (us-
ing the NEC PC-PR201PL control protocol) or complies with one of the fol-
lowing EPSON control standards: ESC/P 24-J83C (color), or ESC/P 24-
J82 (monochrome).
When using a monochrome printer with an NT631C, set Tone printing with
the NT631C memory switches (page 169).
3-4 Connecting a Bar Code Reader
Connecting a bar code reader to the NT631/NT631C enables bar code data
to read as character strings into character string input fields, and set in char-
acter string memory tables.
In order to use a bar code reader, the Comm. A Method memory switch must
be set to Bar-Code Reader.
For details on the method for inputting character strings with a bar code
reader, refer to 3-7 Input of Numeric values and Character Strings in the
NT31/NT31C/NT631/NT631C Programmable Terminal Reference Manual.
+DC
RESET
RDA
TRM
RDB
SDA
SDB
CSA
CSB
24V PRINTER PORT B PORT A