USRobotics NETServer/8 - Manual (Page 12)

1-4 Overview
New Modem Port Features
Release 3.1 of the NETServer Command Line and NETServer
Manager software now support the following modem port
features:
•
Download new firmware to the modems using NETServer
Manager (windows software) version 3.2 or later.
•
You can now send AT commands directly to the modems
from the NETServer’s command line.
•
Detect and flush of stopped ports
•
Dialback delay
•
Port status display shows current and configured status
•
Ports reset if Carrier Detect is lost before a user connects to a
host
•
Support for of up to eight Alternate Hosts