USRobotics NETServer/8 - Manual (Page 45)

IP Terminal Server Setup 4-3
A Note About Hosts
When a login user dials in, he or she is forwarded to a host.
Which host the user is forwarded to depends on several things.
The NETServer first attempts to find host information in the
individual’s user table entry. If the user table shows a host of
Default, the NETServer checks the host setting for the port the
user is connected to.
If the port shows a host of Default, the NETServer uses the
Default Host defined in Global Configuration. Note that it is
possible that no host will be defined in any of these places. If
this is the case, the NETServer will return to the login prompt.
The user will not be allowed to log in unless he or she enters a
user name/password for a user with a host defined.
User Table
set user <name> host <default | prompt | IPaddress>
default
Port Default
set s<port #> host <default | prompt | IPaddress>
default
Global Default
set host <IP address>