USRobotics NETServer/8 - Manual (Page 207)

Command Reference 10-57
User Table
The User Table defines users who dial in to the local network to
become virtual nodes or to establish login sessions with local
hosts.
How to . . .
Add a User to the User Table
The user name can be up to 8 characters long, and the password
can be up to 15 characters long. Both user name and user
password are case-sensitive. You cannot have both a login user
and a network user with exactly the same user name. For
example, a login user and a network user cannot both have the
name Bob. However, A login user Bob and a Network user BOB
are allowable because their case difference makes them different
names altogether.
Login users connect to an IP host via a login service like Telnet
or Rlogin. To add a login user to the User Table, use the follow-
ing command:
add user <user name> password <password>
Network users attach to an IP or IPX network using SLIP or PPP.
To add a network user to the User Table, use the following
command:
add netuser <user name> password <password>
Note that you need only use the netuser command option when
adding a network user. When setting parameters for a network
user, set user and set netuser will both work .
Bring Up the List of Commands
To bring up a list of commands and command options for the
user table, use the following command:
help set user