Syslog system message examples – USRobotics NETServer/8 User Manual

Page 257

Advertising
background image

Syslog Accounting E-3

Syslog System Message Examples

router1 dialnet: port S16 ppp_sync failed dest cane

Router1 is unable to establish a PPP connection to host cane on
synchronous port S16.

usr1 NETServer: port S2 Login succeeded for doug

User doug has logged into port S2 on usr1.

usr1 NETServer: port S5 session disconnected user doug

User doug has disconnected from port S5 on usr1.

usr1 NETServer: port S1 Dialback requested for bri

User bri has successfully logged in on a dialback user account
on port S1 of usr1, which will hang up and call him back.

usr1 dialnet: port S8 doug login failed

User doug has failed to login on port S8 of usr1.

usr1 dialnet: port S11 Pbeach succeeded dest 149.198.7.1

Netuser Pbeach has successfully logged in using address
149.198.7.1 (beach), on port S11 of usr1.

usr1 dialnet: port S1 connection succeeded dest beach

PPP negotiation for host beach succeeded on port S1 of usr1 (see
below).

usr1 dialnet: port S9 session disconnected dest beach

Netuser beach has disconnected.

usr1 dialnet: port S6 connection failed dest beech

beech has failed to connect successfully on port S6 of usr1.

usr1 dialnet: port S10 Dsand dialback requested to Lsand

Dsand has successfully logged in on a dialback netuser account
on port S10 of usr1; usr1 will hang up and connect to location
Lsand.

Advertising
This manual is related to the following products: