USRobotics NETServer/8 - Manual (Page 267)

RADIUS F-7
Framed-Routing
Default is None. This determines whether the NETServer
permits RIP packets to be sent to or received from the remote
user. Possible values are:
None The NETServer does not send any RIP mes-
sages to the remote user and discards any RIP
messages received from the user.
Broadcast The NETServer broadcasts RIP packets to the
remote user.
Listen The NETServer listens for RIP messages from
the remote user.
Broadcast-Listen The NETServer broadcasts RIP messages to
the remote user and listens for incoming RIP
messages.
Login-Host
This is the name or IP address of the host a login user will log
into.
Login-Service
This field defines what kind of connection a login user will
make with a host. There are four options:
•
Telnet - default port of 23
•
Rlogin - default port of 513
•
TCP-Clear (also called Netdata) - default port of 6000
•
PortMux - default port of 1642
Login-TCP-Port
This field forces the user to connect with a specific TCP port
(such as 23, the default telnet port).