USRobotics NETServer/8 - Manual (Page 206)

10-56 Command Reference
Read Hosts
This defines which host(s) can perform SNMP GET operations
on the NETServer MIB objects. Use the following command:
add snmphost reader < any | none | IP address>
Valid options are:
Any Any host with the correct read community may
retrieve SNMP data from the NETServer.
None The NETServer will not respond to any attempts
to retrieve SNMP data.
IP Address A specific host may read SNMP data from the
NETServer. You can create a list of allowed hosts
by executing the following command for each host
in the list.
add snmphost reader <name or IP address>
Write Hosts
This defines which host(s) can perform SNMP SET operations
on the NETServer MIB objects. Use the following command:
add snmphost writer < any | none | IP address>
Valid options are:
Any Any host with the correct read community may
write SNMP data to the NETServer.
None The NETServer will not respond to any attempts
to write SNMP data.
IP Address A specific host may write SNMP data to the
NETServer. You can create a list of allowed hosts
by executing the following command for each host
in the list.
add snmphost writer <name or IP address>