USRobotics NETServer/8 - Manual (Page 208)

10-58 Command Reference
Change a User’s Parameter(s)
To change a user’s parameters, use the following command:
set user <user name> <option> <value>
Delete a User
Use the following command to delete users:
delete user <user name>
Save User Table Changes
To save changes to the user table, type the following:
save user
View the User Table
To view the User Table, type the following command:
show table user
The information you see might look something like this:
User Type Address/Host Netmask/Service RIP
————— ———————— ———————— —————————— ——
sasha Network User 199.55.55.55 255.255.255.0 On
net Login User Prompt PortMux
TECH Network User 199.99.55.55 255.255.255.0 Off
View a Particular User
To view information on a particular user, type the following
command:
show user <user name>
The information displayed for a login user might look some-
thing like this:
Username: robin Type: Login User
Host: default Login Service: Telnet (23)