USRobotics NETServer/8 - Manual (Page 269)

RADIUS F-9
For example:
cindyg Password=“billthecat”
User-Service-Type=Dialback-Login-User,
Dialback-No=“19195551234”,
Login-Host=NY_Sales,
Login-Service=PortMux
Framed-User
The NETServer command line software would call this a
network user. Once the user ID and password are authenti-
cated, users are connected to the network via PPP or SLIP.
A Framed-User entry must contain the following parameters:
User-Name, Password, Framed-Protocol, Framed-Address, and
Framed-Netmask.
Framed-Routing, Client-Id, Client-Port-Id and Framed-Com-
pression are optional parameters.
For example:
daver Password=“antietem”, Client-Id=NS3, Client-Id-Port=5
User-Service-type=Framed-User,
Framed-Protocol=PPP,
Framed-Address=199.199.199.199,
Framed-Netmask=255.255.255.0
Dialback-Framed-User
Unlike the NETServer command line software, RADIUS defines
a dialback network user as a separate user type entirely. When
such a user’s name and password are authenticated, the
NETServer disconnects and dials the user back using the
location table entry designated by the “Dailback-Name” param-
eter.
A Dialback-Framed-User entry must contain the following
parameters: User-Name, Password and Dialback-Name.
Client-Id and Client-Port-Id, are optional parameters.
For example:
harryk Password=“antietem”, Client-Id=NS3, Client-Id-Port=5
User-Service-type=Framed-User,
Dialback-Name=“East_Sales”,