USRobotics NETServer/8 - Manual (Page 164)

10-14 Command Reference
Location Table
Use the location table to define sites that the NETServer can dial
out to. (As opposed to dialing in, which requires a User Table
entry).
How To . . .
Add a Location to the Location Table
To add a remote site or host to the Location Table, use the
following command:
add location <location name>
The Location Name is case sensitive and can be up to 15 charac-
ters long. Sales and sales would be two different locations. The
Location Name should be the name for the remote site in the
remote network’s SNMP server, domain server, or Novell
bindery.
Bring Up the List of Commands
To bring up a list of commands and command options for the
Location Table, use the following command:
help set location
Change a Location’s Parameter(s)
To change a location’s parameters, use the following command:
set location <location name> <option> <value>
For example, to change the MTU value of a location called
westsales to 1099, you would issue the following command:
set location westsales mtu 1099
Delete a Location from the Location Table
To delete a location, use the following command:
delete location <location name>