USRobotics NETServer/8 - Manual (Page 272)

F-12 RADIUS
RADIUS Accounting
RADIUS accounting is uses the same basic protocol as the
RADIUS security server. Both servers may run on the same
host, but you may choose a different host to provide each
function if you like.
The accounting server creates a separate account file for each
NETServer under the following directory:
/usr/adm/radacct/<NETServer-hostname>/detail
RADIUS accounting fields
The parameters described in this section are unique to the
accounting server. The other parameters used by the RADIUS
accounting server are identical in meaning to the equivalent
parameters in the RADIUS security server.
Acct-Status-Type
There are two possible values for this record: Start and Stop.
The record is sent when service to a specific users account
begins or ends.
Acct-Delay-Time
This shows how many seconds the NETServer has been trying
to submit this record. This value is subtracted from the time of
arrival so that the approximate time of the event can be deter-
mined.
Acct-Session-ID
This is a unique, eight-digit hexadecimal accounting ID that
makes it easier to match the “Start” record for a session to the
“Stop” record. Both of these records will have the same session
ID when they are generated by the same session. The session ID
must be in quotes.