USRobotics NETServer/8 - Manual (Page 51)

IP Terminal Server Setup 4-9
Adding a Remote User to the User Table
Users for terminal server applications are configured as login
users.
Step 1 - Add the user to the User Table
Type the following command:
add user <name> password <password>
Step 2 - Configure the user
You must specify a login service for each user. Specifying a host
for each user is optional if you have either a port default or a
global default host defined.
Host
This tells the NETServer which host the user will be logging in
to. Use the following command:
set user <name> host <host type>
<host type> is default, prompt or a specific IP address
Default (Default) The user is passed on to the default host
for the port he or she is connected to.
set user <name> host default
Prompt The user is given a Host: prompt. Users type the
name or IP address of the host they want.
Note that if the port default host type is also
prompt, the host prompt appears before login.
Otherwise, the host prompt appears after login.
set user <name> host prompt
IP Address The user is connected to a specific host other than
the default host. Type in the IP address of the
specific host.
set user <name> host <IP address>