USRobotics NETServer/8 - Manual (Page 200)

10-50 Command Reference
Delete a Routes Table Entry
To delete an IP route, use the following command:
delete route <destination>
To delete an IPX route, use the following command:
delete ipxroute <destination>
Save Routes Table Changes
Use the following command for IP routes:
save routes
Use the following command for the IPX routes table:
save ipxroutes
View the IP Routes Table
Use the following command to view the IP routes table:
show routes
The information you see might look something like this:
Destination Gateway Flag Met Interface
——————— ———————— —— — ————
192.77.206.0 192.77.206.57 NL 1 Net0