USRobotics NETServer/8 - Manual (Page 31)

Configuration Overview 3-1
Chapter 3
Configuration Overview
The internal firmware lets you manage and configure the
NETServer by typing commands. This chapter covers the
following:
•
How to set up applications
•
Issuing commands
•
Quick Command Overview
•
Overview of configurable tables
How to Setup Applications
There are three applications the NETServer is designed to
handle: user dial in access, modem sharing, and LAN-to-LAN
routing. All other applications are variations on one of these.
Applications - Each modem can be configured for one or more of these
LAN-to-LAN Routing
User Dial In Access IP Modem Sharing
Configuration for each of these applications is a two step
process:
1. Configure one or more modems to support the application.
Note that modem ports may be configured to support
multiple applications at the same time.
2. Add user table or location table entries or both, depending
on the application.