USRobotics NETServer/8 - Manual (Page 74)

5-16 Network Dial In Access
Create User Table entries for the dial in users
Use the following commands to create an IPX user account for
UserA:
add netuser userA password userApw
set user userA ipxnet 00010000
set user userA protocol ppp
set user userA mtu 1500
set user userA routing on
UserB also has both the IP and the IPX protocol stacks loaded on
his machine. So, we’ll tell the NETServer what his IP address is
just in case he ever wants to talk IP across the link.
add netuser userB password userBpw
set userB address 192.77.203.5
set userB netmask 255.255.255.0
set user userB ipxnet 00020000
set user userB protocol ppp
set user userB mtu 1500
set user userB routing on
Save your work and reset the ports
Use the following commands:
save all
reset s3
reset s4