USRobotics NETServer/8 - Manual (Page 250)

C-12 Software Download
Invalid Control Word
The SDL application layer does not recognize the control word
returned from the NETServer.
Invalid Device/Manufacturing ID in Flash
There was a problem reading the ID in Flash memory due either
to a wrong or bad chip.
Invalid Directory Path
The directory path specified in the command line does not
comply with DOS naming conventions.
Invalid Filename Prefix
In issuing the pcsdl command, the filename prefix specified for
either the .sdl file (-nsd) or .nac file (-nna) did not match the
prefix stored in the file header. Valid prefixes are listed earlier in
this appendix under Filename Prefixes.
Invalid File Type
The PC SDL program detected an invalid file marker in the file
to be downloaded.
Invalid Flash ROM ID for This Card
The NAC SDL program does not recognize the flash memory ID
sent from the PC SDL program.
Invalid Intel Record Found
This error occurs when the NETServer SDL software detects
unrecognized Intel record types while parsing through the Intel
records in RAM for flash memory programming.
Invalid Software Version
The software version specified in the command line (-vsd or
-vna parameter) was expressed incorrectly. The valid syntax is
xxx.xxx.xxx, where xxx is a decimal number 0
−
255.