USRobotics NETServer/8 - Manual (Page 99)

LAN-to-LAN Routing 6-25
LAN-to-LAN Routing Case Study
The following example shows routing between two NETServers
in order to demonstrate how each end of the connection would
be configured.
This case study assumes the following:
•
both NETServers (NETServerA and NETServerB) are
configured with the correct IPX network number, IPX Frame
Type, IP address and Netmask.
•
NETServerA’s Sysname is NSA. NETServerB’s Sysname is
NSB.
•
both NETServers are set to the factory defaults on all other
settings
•
NETServer A is on LAN1, the main data center of a com-
pany, and NETServer B is on LAN2, a branch office.
•
if traffic on the connection becomes too great, NETServerB
will open a second line
•
if there is no traffic on the connection for 30 minutes,
NETServer B disconnects
Case Study - LAN to LAN Routing Between Two NETServers