USRobotics NETServer/8 - Manual (Page 149)

Administrative Tools 9-15
show sap
Use the following command to view the SAP interfaces:
show sap
The information you see might look something like this:
Server Svc Network Host Sock Hops Interface
------------- ----- ------------------------------------------- ------- ------------
PRINTERS 47 0AE31100:000000000001:8060 3 net0
AE_311 4 0AE31100:000000000001:0451 2 net0
show sessions
This command provides a port-by-port synopsis of activity,
including information such as the user currently dialed in, the
destination host system, the type of connection, and the amount
of time that they have been dialed in. It allows you to track
activity on each port, which helps in diagnosing problems with
telephony issues, such as proper hunt group rollover.
show sessions
The information you see might look something like this:
Port User Host/Inet/Dest Type Dir Status Online Idle
------ ------ ------------------ ------- ----- -------- -------- -----
S0 !root - Log/Net In COMMAND 0 0
S1 - - Log/Net In IDLE 0 0
S2 - - 2Way/Net I/O IDLE 0 0
S3 - - Log/Net In IDLE 0 0
S4 - - Login In IDLE 0 0
S5 - - Log/Net In IDLE 0 0
S6 - - Log/Net In IDLE 0 0
S7 SUPER USRSUN1 Log/Net I/O ESTABLISHED 0 0
S8 - - Log/Net In IDLE 0 0
Port The number of the port.
User The user name of the login or network user
connected to or logging in to a port.
Host/Inet/Dest This is the host or IPX server that the user
has established a session with.