YSI IQ SensorNet 2020 XT Terminal - Manual (Page 60)

Installation System 2020 XT USB
3 - 30 ba76019e01 12/2012
Caution
No contact base may be mounted on the back of the module
(danger of short-circuit!) if the module is mounted on a wall, a sun
shield, or a top hat rail.
3.6.2 Mounting on a mounting stand with the SSH/IQ sun shield
Materials required
 SSH/IQ sun shield (see chapter 10 A
CCESSORIES AND OPTIONS ).
Tools  4 mm set screw wrench
 Phillips screw driver.
Mounting the sun shield
on a mounting stand
Fig. 3-20 Mounting the SSH/IQ sun shield on a mounting stand
1 Screw the sun shield (pos. 1 in Fig. 3-20) with the four
hexsocket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
2
3
4
1