A7-7, 8) dlmebasicinfo, 9) plmebasiccharacteristics – Yokogawa digitalYEWFLO (DY-FF) User Manual

Page 124: 10) channelstates, 11) plmebasicinfo

Advertising
background image

<APPENDIX 7. LINK MASTER FUNCTIONS>

A7-7

IM 01F06F00-01EN

(8) DlmeBasicInfo

Sub-

index

Element

Size

[bytes]

Description

1 SlotTime

2 Indicates

the

capability value for
V(ST) of the device.

2 PerDlpduPhlOverhead

1 V(PhLO)

3 MaxResponseDelay

1 Indicates

the

capability value for
V(MRD) of the device.

4 ThisNode

1

V(TN), node address

5 ThisLink

2 V(TL),

link-id

6 MinInterPduDelay

1 Indicates

the

capability value for
V(MID) of the device.

7 TimeSyncClass

1 Indicates

the

capability value for
V(TSC) of the device.

8 PreambleExtension

1 V(PhPE)

9 PostTransGapExtension 1 V(PhGE)

10 MaxInterChanSignalSkew 1 V(PhIS)

(9) PlmeBasicCharacteristics

Sub-

index

Element

Size

[bytes]

Value Description

1 Channel

Statistics
Supported

1 0

Statistics
data are not
supported.

2 Medium

AndData
Rates
Supported

8 0x49 00 00 00 00 00 00 00 Wire medium,

voltage mode,
and 31.25 kbps
are supported.

3 IceVersion 2 0x0403

IEC 4.3 is
supported.

4 NumOf

Channels

1 1

5 Power

Mode

1 0

0:

Bus-powered;

1: Self-powered

(10) ChannelStates

Sub-

index

Element

Size

[bytes]

Value Description

1

Channel 1

1

0x00 In Use, No Bad since last

read, No Silent since last read,
No Jabber since last read, Tx
Good, Rx Good

2 Channel

2 1 0x80 Unused

3 Channel

3 1 0x80 Unused

4 Channel

4 1 0x80 Unused

5 Channel

5 1 0x80 Unused

6 Channel

6 1 0x80 Unused

7 Channel

7 1 0x80 Unused

8 Channel

8 1 0x80 Unused

(11) PlmeBasicInfo

Sub-

index

Element

Size

[bytes]

Value Description

1 InterfaceMode

1

0

0: Half duplex;
1: Full duplex

2 LoopBackMode

1 0

0:

Disabled;

1: MAU; 2: MDS

3 XmitEnabled

1

0x01 Channel 1 is enabled.

4 RcvEnebled

1

0x01 Channel 1 is enabled.

5 PreferredReceive

Channel

1

0x01 Channel 1 is used for

reception.

6 MediaType

Selected

1

0x49 Wire medium, voltage

mode, and 31.25 kbps
are selected.

7 ReceiveSelect

1

0x01 Channel 1 is used for

reception.

(12) LinkScheduleActivationVariable

Writing the version number of an LAS schedule,
which has already been downloaded to the domain,
to this parameter causes the corresponding
schedule to be executed. On the other hand,
writing 0 to this parameter stops execution of the
active schedule.

(13) LinkScheduleListCharacteristicsRecord

Sub-

index

Element

Size

[bytes]

Description

1 NumOf

Schedules

1

Indicates the total number of
LAS schedules that have been
downloaded to the domain.

2 NumOfSub

SchedulesPer
Schedule

1

Indicates the maximum number
of sub-schedules an LAS
schedule can contain. (This
is fi xed to 1 in the Yokogawa
communication stacks.)

3 ActiveSchedule

Version

2

Indicates the version number
of the schedule currently
executed.

4 ActiveSchedule

OdIndex

2

Indicates the index number
of the domain that stores the
schedule currently executed.

5 ActiveSchedule

StaringTime

6

Indicates the time when the
current schedule began being
executed.

Advertising