2-2. hold, 2-2. hold -8 – Yokogawa EXA ISC202 2-wire Conductivity Transmitter/Analyzer User Manual
Page 50
Advertising
IM 12D06A03-01E
5-8 Parameter setting
5-2-2. HOLD
mA
*
Here HOLD is enabled/disabled.
When enabled:
• The analyser’s output will be set to HOLD when entering Maintenance-,
Commissioning- or Service menu.
• Up on exiting one of the menus, the user is asked if HOLD should
remain activated.
• Manual Hold will become available in “maintenance Mode” (to manually
set the analyser’s output in HOLD)
Advertising