Yokogawa Standalone MW100 User Manual
Page 132
Advertising
3-10
IM MW100-01E
Modbus Master Setting 2
1.
From the
Top screen, click Communication Setting > Modbus Master Setting 2.
2.
Select the command number group to be set from the
Command List list.
3.
Select READ/WRITE in the
Function box.
4.
Enter the address of the slave device in the
Slave box.
5.
Enter the numbers of the used registers in the
Register box. When specifying
multiple registers, enter the first register number.
6.
Select a data type in the
Data Type list.
7.
Enter the channel numbers used in the
Channel boxes.
8.
Click the
Apply button. The setting changes take effect.
For details on the registers and data types, see “Modbus Master Function” in “Modbus
Protocol Specifications” in section 5.2.
3.2 Communication Settings
Advertising