Yokogawa Standalone MW100 - Manual (Page 184)

3-62
IM MW100-01E
• Lite Monitor screen (Firmware version R3.03 or later)
Displays measured data in a simplified format.
Parts of the Display
This is a description of the icons and areas for displaying measured data in the Lite
Monitor screen.
Changing the font size
Select the text size for the digital display.
Change settings button
Select the text size for the digital display.
Changing the display update interval
Enter the display update interval.
Allowable setting range is 1 to 3600.
Pause button
Record start/stop buttons
Computation start/stop/reset/clear buttons
Select the display
group
Status of each action
Alarm Statuses
Turn red when alarms occur.
Not displayed if alarms do not occur, or are not set.
Note
• Depending on the operating environment, approximately 4 KB of PC memory can be
consumed for a single screen update. If the PC runs out of memory, close then reopen the
Web screen.
• When accessing the screen with general user privileges, the computation start/stop/reset/
clear and recording start/stop buttons are not available.
3.16 Measured Data Monitor Display/Settings