Yokogawa Standalone MW100 - Manual (Page 86)

1-72
IM MW100-01E
1.16 Report Function (/M3 Option)
The maximum, minimum, average, integral, and instantaneous values of the specified
measurement or MATH channels (up to 60 ch) can be written to the following report files.
Created File Report Type Description
Daily Hourly + Daily Report data including 24 hours of hourly data from a specified
time + 1 day of report data
Weekly Daily + Weekly Report data including 7 days of daily data from a specified
time* on a specified day + 1 week of report data
Monthly Daily + Monthly Report data including 1 month of daily data from a specified
time* on a specified day + 1 month of report data
* The specified time for weekly and monthly reports is the same as the creation time for the daily
report files.
Starting and Stopping the Report Function
• When recording is started, acquisition of report data starts.
• The timing of report file creation, report data writing, and report data writing stop is
shown in the figure below.
• If recording is stopped, report data from the last writing of report data to the time
recording was stopped is written, and acquisition of report data stops.
• Weekly report file
Record start
Specified day for creation
of weekly reports
Report file
writing stops
Report file created Report file created
Specified day for creation
of weekly reports
Report file
writing stops
Report file
writing stops
Report file created
1 day
= Write daily report data
= Write daily and weekly report data
Record stop
1 week
• Monthly report file
Record start
Specified date for creation
of monthly reports
Report file
writing stops
Report file created Report file created
Specified date for creation
of monthly reports
Report file
writing stops
Report file
writing stops
Report file created
1 day
= Write daily report data
= Write daily and monthly report data
Record stop
1 month
• Daily report file
Record start
Specified time for creation
of daily reports
Report file
writing stops
Report file created Report file created
Specified time for creation
of daily reports
Report file
writing stops
Report file
writing stops
Report file created
1 hour
= Write hourly data
= Write hourly and daily data
Record stop
24 hours
Resetting the Average, Maximum, Minimum, and Integral Values
The values are reset when report file writing stops. When recording starts, you can select
to reset or not reset the values held in report data.