Yokogawa Standalone MW100 - Manual (Page 43)

1-29
IM MW100-01E
Explanation of Functions
1
2
3
4
5
App
Index
• Modbus Server Function
Modbus clients connect to an MW100 acting as the Modbus Server, and read from or
write to its internal registers.
Measured data and alarm statuses from measurement channels, measured data
and alarm statuses from MATH channels, data from communication input channels,
and time information are stored in the MW100’s registers. Up to four clients can be
connected simultaneously.
MW100
(Server)
Ethernet
DX2000 (with the /MC1 option)
(Client)
MW100
Using Yokogawa’s DX2000 Paperless Recorder (with the /MC1 option), you can
easily monitor measured data from the MW100.
EtherNet/IP Server Function (Firmware version R3.02 or later)
The Ethernet/IP client can connect to the MW100 acting as the Ethernet/IP server to read
data from MW100 measurement channels and math channels, and read/write data on
communication input channels.
Note
You can download the EDS file, mw100_eds.zip, from the following web site.
http://www.yokogawa.com/ns/mw100/
1.3 Functions of the Main Module